Mechanical characteristic and stress-strain modelling of friction stir welded 6061-T6 aluminium alloy butt joints

Beibei Li, Pengcheng He*, Jingfeng Wang, Xuebei Pan, Yuanqing Wang, Zhongxing Wang, Charalampos Baniotopoulos

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

Abstract

This paper investigates the mechanical properties and softening extent of friction stir welded (FSW) 6061-T6 aluminium alloy butt joints through experimental studies and theoretical analyses. A total of 138 monotonic tensile coupon tests and 46 Vickers hardness tests, cut from 5-, 8-, 12, 16-mm-thick welded plates using various welding speed, tool rotation speed and tool configurations, were systematically performed. The surface morphology after welding, failure modes, stress-strain curves and hardness distribution laws were evaluated. An assessment of the applicability of existing constitutive model and proposed model to FSW aluminium alloys were presented, with predictive equations for the key input parameters further derived. The results show that the strength reduction and softening extent induced by FSW under the optimal welding parameters were superior to those of 6061-T6 aluminium alloy plates joined by fusion welding process in accordance with Chinese and European standards, indicating the effectiveness and applicability in aluminium alloy component forming and structural connections using FSW technology. The stress-strain curves of FSW butt joints exhibited higher strain hardening effect but lower ductility. The developed three-stage Ramberg-Osgood model, using seven known key input parameters, was shown to provide a very high accurate and consistent predictions in full-range stress-strain curves in comparison with existing constitutive models. Moreover, the proposed constitutive model, using only three common available parameters, could still achieve a great balance between accuracy and practicality.
Original languageEnglish
Article number111645
Number of pages18
JournalThin-Walled Structures
Volume198
Early online date3 Feb 2024
DOIs
Publication statusPublished - May 2024

Bibliographical note

Acknowledgments:
This work was financially supported by the National Natural Science Foundation of China (no. 52108154), the China National Postdoctoral Program for Innovative Talents (no. BX20200193), the Fundamental Research Funds for the Central Universities (no. JZ2023HGTB0258) and the Guangxi Science and Technology Major Program (no. AA23073019).

Keywords

  • 6061-T6 aluminium alloy
  • Friction stir welding
  • Strength reduction
  • Softening extend
  • constitutive model

ASJC Scopus subject areas

  • Civil and Structural Engineering

Fingerprint

Dive into the research topics of 'Mechanical characteristic and stress-strain modelling of friction stir welded 6061-T6 aluminium alloy butt joints'. Together they form a unique fingerprint.

Cite this