Designing microfluidic devices to sort haematopoietic stem cells based on their mechanical properties

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)
186 Downloads (Pure)

Abstract

Aim. Few haematopoietic stem cells (HSCs) injected systemically for therapeutic purposes actually reach sites of injury as the vast majority become entrapped within pulmonary capillaries. One promising approach to maintain circulating HSC numbers would be to separate subpopulations with smaller size and/or greater deformability from a heterogeneous population. This study tested whether this could be achieved using label-free microfluidic devices. Methods. 2 straight (A-B) and 3 spiral (C-E) devices were fabricated with different dimensions. Cell sorting was performed at different flow rates after which cell diameter and stiffness were determined using micromanipulation. Cells isolated using the most efficient device were tested intravitally for their ability to home to the mouse injured gut. Results. Only straight Device B at a high flow rate separated HSCs with different mechanical properties. Side outlets collected mostly deformable cells (nominal rupture stress/σR = 6 81 kPa; coefficient of
variation/CV = 0 31) at a throughput of 2 3 × 105 cells/min. All spiral devices at high flow rates separated HSCs with different stiffness and size. Inner outlets collected mostly deformable cells in Devices C (σR = 25 06 kPa; CV = 0 26), D (σR = 22 21 kPa; CV = 0 41), and E (σR = 29 26 kPa; CV = 0 27) at throughputs of 2 3 × 105 cells/min, 1 5 × 105 cells/min, and 1 6 × 105 cells/min, respectively. Since Device C separated cells with higher efficiency and throughput, it was utilized to test the homing ability of separated cells in vivo. Significantly more deformable cells were observed trafficking through the injured gut—interestingly, increased retention was not observed. Conclusion. This study applied microfluidics to separate subpopulations from one stem cell type based on their intrinsic mechanical heterogeneity. Fluid dynamics within curved devices most effectively separated HSCs. Such devices may benefit cellular therapy.
Original languageEnglish
Article number8540706
JournalStem cells international
Volume2019
DOIs
Publication statusPublished - 5 Sept 2019

ASJC Scopus subject areas

  • Molecular Biology
  • Cell Biology

Fingerprint

Dive into the research topics of 'Designing microfluidic devices to sort haematopoietic stem cells based on their mechanical properties'. Together they form a unique fingerprint.

Cite this