David Butler

Research output

Research output per year 1995 2005 2007 2008 2009 2010 2014 2024

• 36 Article
• 23 Conference contribution
• 4 Chapter
• 2 Entry for encyclopedia/dictionary
• 1 More
  • 1 Review article

Research output per year

Research output per year

Search results

• 2024

  The Juxtaposition of Our Future Electrification Solutions: A View into the Unsustainable Life Cycle of the Permanent Magnet Electrical Machine

  Paterson, L., Miscandlon, J. & Butler, D., 25 Mar 2024, In: Sustainability. 16, 7, 26 p., 2681.

  Research output: Contribution to journal › Review article › peer-review

  Open Access

  File

  • electrification 100%
  • life cycle 78%
  • Permanent magnets 67%
  • Life cycle 66%
  • energy production 25%
  14 Downloads (Pure)
• 2023

  Challenges for the adoption of electric vehicles in Thailand: potential impacts, barriers, and public policy

  Preedakorn, K., Butler, D. & Mehnen, J., 13 Jun 2023, In: Sustainability. 15, 12, 21 p., 9470.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • electric vehicle 100%
  • Thailand 65%
  • Electric vehicles 62%
  • public policy 52%
  • public 46%
  73 Downloads (Pure)

• Economics of Additive Manufacturing

  Klahn, C., Butler, D. & Pei, E., 25 Oct 2023, Springer Handbook of Additive Manufacturing. Pei, E., Bernard, A., Gu, D., Klahn, C., Monzón, M., Petersen, M. & Sun, T. (eds.). 1 ed. Springer, p. 31-42 12 p. (Springer Handbooks).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Manufacturing 100%
  • Economics 55%
  • Manufacturing Process 22%
  • Costs and Benefits 21%
  • Value Creation 20%

• Effects of Shot Peening Pressure on Friction and Wear of High Pressure Cold Sprayed Ti-6Al-4V Coatings Under Dry and Lubrication Conditions

  Khun, N. W., Trung, P. Q., Yeetan, A. W., Sun, W., Liu, E. & Butler, D. L., 15 Sept 2023, In: Tribology in Industry. 45, 3, p. 472-486 15 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Shot Peening 100%
  • shot peening 85%
  • Shot peening 71%
  • mineral oils 68%
  • Lubrication 65%

• Post-processing for Additive Manufactured Metal Parts: A Brief Introduction

  Butler, D. & Smith, J., 25 Oct 2023, Springer Handbook of Additive Manufacturing. Pei, E., Bernard, A., Gu, D., Klahn, C., Monzón, M., Petersen, M. & Sun, T. (eds.). 1 ed. Springer, p. 821-832 12 p. (Springer Handbooks).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Heat treatment 100%
  • Inspection 87%
  • Specifications 74%
  • Metals 73%
• 2021

  Optimization of Selective Laser Melting process for zirconium lattices as orthopaedic implants

  Crocco, B., Imbrogno, S., Tamimi, S., Attallah, M. & Butler, D., 2021, Euro PM2021 Congress Proceedings. European Powder Metallurgy Association (EPMA), (Euro PM Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Hatches 100%
  • orthopedics 94%
  • Zirconium 88%
  • Selective laser melting 88%
  • Orthopedics 86%

• Study on hardness and wear resistance of shot peened AA7075-T6 aluminum alloy

  Khun, N. W., Trung, P. Q. & Butler, D. L., 8 Mar 2021, In: Engineering Research Express. 3, 1, 14 p., 015031.

  Research output: Contribution to journal › Article › peer-review

  • Shot peening 100%
  • Wear resistance 75%
  • Aluminum alloys 70%
  • Hardness 63%
  • Mineral oils 42%
  3 Citations (Scopus)
• 2020

  Standards in additive manufacturing

  Butler, D. & Woolliams, P., 21 Sept 2020, Precision Metal Additive Manufacturing. p. 133-156 24 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
• 2018

  A non-contact measuring system for in-situ surface characterization based on laser confocal microscopy

  Fu, S., Cheng, F., Tjahjowidodo, T., Zhou, Y. & Butler, D., 13 Aug 2018, In: Sensors (Switzerland). 18, 8, 2657.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Confocal microscopy 100%
  • laser microscopy 98%
  • Confocal Microscopy 77%
  • Noise 62%
  • Characterization (materials science) 59%
  40 Citations (Scopus)

• A novel media properties-based material removal rate model for magnetic field-assisted finishing

  Kum, C. W., Sato, T., Guo, J., Liu, K. & Butler, D., Jun 2018, In: International Journal of Mechanical Sciences. 141, p. 189-197 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Abrasive 100%
  • abrasives 96%
  • machining 85%
  • Abrasives 83%
  • Magnetic fields 71%
  28 Citations (Scopus)

• A numerical and experimental study of distribution of the residual stress on the shot peened low alloy steel

  Trung, P. Q., Butler, D. L. & Idapalapati, S., 1 Oct 2018, In: Journal of Engineering Materials and Technology, Transactions of the ASME. 140, 4, 041006.

  Research output: Contribution to journal › Article › peer-review

  • Shot Peening 100%
  • shot peening 85%
  • Residual Stress 76%
  • high strength steels 72%
  • High strength steel 59%
  3 Citations (Scopus)

• Effect of Shot Peening Process on the Fatigue Life of Shot Peened Low Alloy Steel

  Trung, P. Q., Khun, N. W. & Butler, D. L., 1 Jan 2018, In: Journal of Engineering Materials and Technology, Transactions of the ASME. 140, 1, 011013.

  Research output: Contribution to journal › Article › peer-review

  • Shot Peening 100%
  • shot peening 85%
  • fatigue life 77%
  • high strength steels 72%
  • Shot peening 71%
  8 Citations (Scopus)
• 2017

  An investigation of the properties of conventional and severe shot peened low alloy steel

  Trung, P. Q., Butler, D. L. & Khun, N. W., Jul 2017, In: Materials Research Express. 4, 7, 076501.

  Research output: Contribution to journal › Article › peer-review

  • Shot Peening 100%
  • Shot peening 71%
  • High strength steel 59%
  • Surface Roughness 29%
  • Wear 27%
  9 Citations (Scopus)

• New approach to estimate coverage parameter in 3D FEM shot peening simulation

  Pham, T. Q., Khun, N. W. & Butler, D. L., 2 Sept 2017, In: Surface Engineering. 33, 9, p. 687-695 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Shot Peening 100%
  • shot peening 85%
  • Shot peening 71%
  • finite element method 48%
  • Residual Stress 38%
  35 Citations (Scopus)

• Surface roughness study on mirror finish surface products using patterned area illumination method

  Fu, S., Cheng, F. & Butler, D. L., 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. Phillips, D. & Billington, D. (eds.). euspen, p. 395-396 2 p. (Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Mirrors 100%
  • Surface Roughness 98%
  • Machining 95%
  • surface roughness 95%
  • Illumination 87%
• 2016

  Chemical mechanical planarisation

  Butler, D. L., 12 Dec 2016, Nanofinishing Science and Technology: Basic and Advanced Finishing and Polishing Processes. CRC Press, p. 597-616 20 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• Effects of shot peening pressure, media type and double shot peening on the microstructure, mechanical and tribological properties of low-alloy steel

  Trung, P. Q., Khun, N. W. & Butler, D. L., Dec 2016, In: Surface Topography: Metrology and Properties. 4, 4, 045001.

  Research output: Contribution to journal › Article › peer-review

  • Shot Peening 100%
  • shot peening 85%
  • high strength steels 72%
  • Shot peening 71%
  • High strength steel 59%
  16 Citations (Scopus)

• Mechanical and Tribological Properties of Shot-Peened SAE 1070 Steel

  Khun, N. W., Trung, P. Q. & Butler, D. L., 2 Sept 2016, In: Tribology Transactions. 59, 5, p. 932-943 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Shot Peening 100%
  • shot peening 75%
  • Shot peening 62%
  • shot 55%
  • strip 50%
  14 Citations (Scopus)
• 2014

  Development of magnetic field-assisted finishing (MFAF) for exotic materials using abrasive slurry circulation system effects of media properties on the finishing characteristics

  Kum, C. W., Sato, T. & Butler, D. L., 2014, Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014. Leach, R. (ed.). euspen, p. 295-298 4 p. (Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Abrasive 100%
  • abrasives 96%
  • Lubrication 91%
  • Interstitial 85%
  • Abrasives 83%

• Microstructure formation of porous sintered Ti-Si-Zr compacts with mechanically alloyed-activated Ti-Si and TiH₂ powders

  Jarfors, A. E. W., Butler, D. L. & Goi, K. L. S., 5 May 2014, In: Journal of Alloys and Compounds. 594, p. 202-210 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Elastic moduli 100%
  • Powders 96%
  • Microstructure 80%
  • Sintering 73%
  • Porosity 69%
  14 Citations (Scopus)

• Scanning probe microscopy

  Butler, D., 17 Dec 2014, Encyclopedia of Microfluidics and Nanofluidics.

  Research output: Chapter in Book/Report/Conference proceeding › Entry for encyclopedia/dictionary

• Surface roughness measurement

  Butler, D., 17 Dec 2014, Encyclopedia of Microfluidics and Nanofluidics.

  Research output: Chapter in Book/Report/Conference proceeding › Entry for encyclopedia/dictionary

• The topographic characterisation of grinding wheels – A proposed measurement strategy

  Butler, D. L., 2014, Advances in Abrasive Technology XVII. Yan, J., Aoyama, H. & Yui, A. (eds.). Trans Tech Publications Ltd, p. 686-691 6 p. (Advanced Materials Research; vol. 1017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Grinding wheels 100%
  • Topography 31%
  • Wheels 22%
  • Profilometry 19%
  • Electric power utilization 10%
  1 Citation (Scopus)
• 2013

  An innovative method for coordinate measuring machine one-dimensional self-calibration with simplified experimental process

  Fang, C. & Butler, D. L., May 2013, In: Review of Scientific Instruments. 84, 5, 055103.

  Research output: Contribution to journal › Article › peer-review

  • Coordinate measuring machines 100%
  • Calibration 61%
  • Interferometers 49%
  • Error compensation 48%
  • artifacts 31%
  4 Citations (Scopus)
• 2011

  Measurement of microchannels inside transparent substrate based on confocal microscopy

  Cheng, F., Butler, D. L. & Fan, K. C., 2011, Seventh International Symposium on Precision Engineering Measurements and Instrumentation. 83212D. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8321).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Confocal Microscopy 100%
  • Microchannel 92%
  • Confocal microscopy 81%
  • Refractive Index 79%
  • Refractive index 72%
• 2010

  An alternative non-contact planarization technique by utilizing the electrokinetic phenomenon

  Leo, C. S., Ng, S. H., Butler, D. L. & Danyluk, S., 2010, Advanced Interconnects and Chemical Mechanical Planarization for Micro- and Nanoelectronics. p. 141-146 6 p. (Materials Research Society Symposium Proceedings; vol. 1249).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Electrokinetic Phenomena 100%
  • electrokinetics 73%
  • machining 42%
  • Surface 19%
  • Hydrodynamics 19%

• Development of media for low pressure abrasive flow machining

  Seng, F. W., Stephen, W. Y. M. & Lee Butler, D., 2010, Advances in Abrasive Technology XIII. p. 148-153 6 p. (Advanced Materials Research; vol. 126-128).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Abrasives 100%
  • Machining 77%
  • Deburring 35%
  • Polishing 27%
  • Characterization (materials science) 21%
  1 Citation (Scopus)

• Effects of crystallographic structure on machining performance with polycrystalline oxygen free copper by a single crystalline diamond micro-tool

  Ding, X., Lee, L. C., Butler, D. L. & Shaw, K. C., 2010, Advances in Precision Engineering. Trans Tech Publications Ltd, p. 31-35 5 p. (Key Engineering Materials; vol. 447 448).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Machining 100%
  • Crystalline materials 80%
  • Diamonds 76%
  • Diamond 72%
  • Polycrystalline Solid 68%

• Effects of laser ablation on cemented tungsten carbide surface quality

  Tan, J. L., Butler, D. L., Sim, L. M. & Jarfors, A. E. W., Nov 2010, In: Applied Physics A: Materials Science and Processing. 101, 2, p. 265-269 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Laser ablation 100%
  • Tungsten Carbide 87%
  • tungsten carbides 84%
  • Tungsten carbide 84%
  • Laser Ablation 75%
  8 Citations (Scopus)

• Influence of the electrochemical dissolution effect on the material removal rate utilizing electrokinetic phenomenon

  Leo, C. S., Butler, D. L., Ng, S. H. & Danyluk, S., 2010, Advances in Abrasive Technology XIII. p. 873-878 6 p. (Advanced Materials Research; vol. 126-128).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Dissolution 100%
  • Abrasives 8%
  • Hydrodynamics 7%
  • Surface roughness 7%
  • Electric potential 4%

• The three-dimensional surface topographic characterisation of diamond grinding wheels

  Butler, D. L., 2010, Advances in Abrasive Technology XIII. p. 690-695 6 p. (Advanced Materials Research; vol. 126-128).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Diamond cutting tools 100%
  • Surface measurement 65%
  • Characterization (materials science) 61%
  • Topography 59%
  • Wheels 55%
  1 Citation (Scopus)
• 2009

  A lattice boltzmann based single-phase model: Surface tension and wetting

  Xing, X. Q., Butler, D. L. & Yang, C., 2009, Computational Fluid Dynamics 2006 - Proceedings of the Fourth International Conference on Computational Fluid Dynamics, ICCFD 2006. Springer, p. 619-624 6 p. (Computational Fluid Dynamics 2006 - Proceedings of the Fourth International Conference on Computational Fluid Dynamics, ICCFD 2006).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Surface tension 100%
  • Wetting 96%
  • Simulation 39%
  • Distribution Function 38%
  • Spreading 33%
  1 Citation (Scopus)

• Environmentally benign material removal processes for the fabrication of microdevices

  Danyluk, S., Blackburn, T., Butler, D. & Seng, L. C., 2009, 10th International Symposium on Eco-Materials Processing and Design, ISEPD 2009. Trans Tech Publications Ltd, p. 451-456 6 p. (Materials Science Forum; vol. 620 622).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Experimental study on low pulse energy processing with femtosecond lasers for glaucoma treatment

  Hou, D. X., Butler, D. L., He, L. M. & Zheng, H. Y., Mar 2009, In: Lasers in Medical Science. 24, 2, p. 151-154 4 p.

  Research output: Contribution to journal › Article › peer-review

  • Glaucoma 100%
  • Lasers 85%
  • Eye 32%
  • Water 17%
  3 Citations (Scopus)

• Influence of particle effects on the material removal rate utilizing electrokinetic phenomenon

  Leo, C. S., Blackburn, T. L., Butler, D. L., Ng, S. H., Yang, C. & Danyluk, S., 2009, Advances in Abrasive Technology XII. p. 27-32 6 p. (Advanced Materials Research; vol. 76-78).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Machining 100%
  • Defects 86%
  • Experiments 44%

• Machining with micro-size single crystalline diamond tools fabricated by a focused ion beam

  Ding, X., Butler, D. L., Lim, G. C., Cheng, C. K., Shaw, K. C., Liu, K., Fong, W. S. & Zheng, H. Y., 2009, In: Journal of Micromechanics and Microengineering. 19, 2, 025005.

  Research output: Contribution to journal › Article › peer-review

  • Focused ion beams 100%
  • Machining 93%
  • Ion Beam 79%
  • Crystalline materials 75%
  • Diamonds 71%
  20 Citations (Scopus)

• Metallographic orientation effects on burr formation in machining oxygen-free-copper using single crystalline diamond micro-tools

  Ding, X., Butler, D. L., Lim, G. C., Liu, Y. C., Shaw, K. C. & Zheng, H. Y., 2009, Proceedings of the 24th Annual Meeting of the American Society for Precision Engineering, ASPE 2009. (Proceedings of the 24th Annual Meeting of the American Society for Precision Engineering, ASPE 2009).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Crystalline materials 100%
  • Diamonds 95%
  • Copper 77%
  • Oxygen 77%
  • Machining 75%

• Metallographic structure effects on the machined surface integrity in micro-machining with Al 6061-T6

  Ding, X., Butler, D. L., Lee, L. C., Liu, Y. C., Shaw, K. C. & Zheng, H. Y., 2009, Proceedings of the 24th Annual Meeting of the American Society for Precision Engineering, ASPE 2009. (Proceedings of the 24th Annual Meeting of the American Society for Precision Engineering, ASPE 2009).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Machining 100%
  • Focused ion beams 43%
  • Crystalline materials 33%
  • Diamonds 31%
  • Physics 27%

• The effects of hard particles on the surface quality when micro-cutting aluminum 6061 T6

  Ding, X., Lee, L. C., Butler, D. L. & Cheng, C. K., 2009, In: Journal of Micromechanics and Microengineering. 19, 11, 115013.

  Research output: Contribution to journal › Article › peer-review

  • Surface properties 100%
  • Aluminum 77%
  • Size Effect 57%
  • Aluminium Alloy 55%
  • Force 34%
  12 Citations (Scopus)

• The influence of surface topography on the photocatalytic activity of electrophoretically deposited titanium dioxide thin films

  Toh, A. G. G., Cai, R. & Butler, D. L., 15 Feb 2009, In: Wear. 266, 5-6, p. 585-588 4 p.

  Research output: Contribution to journal › Article › peer-review

  • Photocatalytic activity 100%
  • Titanium dioxide 77%
  • Surface topography 71%
  • titanium oxides 61%
  • Thin films 55%
  16 Citations (Scopus)
• 2008

  Correlation of grinding wheel topography and grinding performance: A study from a viewpoint of three-dimensional surface characterisation

  Nguyen, A. T. & Butler, D. L., 21 Nov 2008, In: Journal of Materials Processing Technology. 208, 1-3, p. 14-23 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Grinding Wheel 100%
  • Abrasive 70%
  • Grinding wheels 67%
  • Topography 64%
  • Abrasives 58%
  76 Citations (Scopus)

• Elastic modulus of sintered porous Ti-Si-Zr, using activation by Ti-Si mechanically alloyed powder and TiH₂ powder

  Goi, K. L. S., Butler, D. L., Jarfors, A. E. W., Yong, J. M. S. & Lim, D. C. S., 25 Feb 2008, In: Materials Science and Engineering: A. 475, 1-2, p. 45-51 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Bulk Modulus 100%
  • Chemical activation 79%
  • Porosity 76%
  • bulk modulus 75%
  • Elastic moduli 74%
  8 Citations (Scopus)

• Fabrication of a micro-size diamond tool using a focused ion beam

  Ding, X., Lim, G. C., Cheng, C. K., Butler, D. L., Shaw, K. C., Liu, K. & Fong, W. S., 1 Aug 2008, In: Journal of Micromechanics and Microengineering. 18, 7, 075017.

  Research output: Contribution to journal › Article › peer-review

  • Focused ion beams 100%
  • Ion Beam 79%
  • Diamonds 71%
  • Diamond 68%
  • Ions 66%
  51 Citations (Scopus)

• Nanometric material removal using the electrokinetic phenomenon

  Seng, L. C., Blackburn, T. L., Ng, S. H., Chun, Y., Butler, D. L. & Danyluk, S., 2008, Device and Process Technologies for Microelectronics, MEMS, Photonics, and Nanotechnology IV. 680028. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6800).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Electrokinetic Phenomena 100%
  • electrokinetics 73%
  • machining 63%
  • Wear 56%
  • Electric Field 54%

• Operational implications of early supplier involvement in semiconductor manufacturing firms: A case study

  Jiao, Y. Y., Jun, J., Jiao, R. J. & Butler, D. L., 24 Oct 2008, In: Journal of Manufacturing Technology Management. 19, 8, p. 913-932 20 p.

  Research output: Contribution to journal › Article › peer-review

  • Early Supplier Involvement 100%
  • Semiconductor Manufacturing 78%
  • Product development 62%
  • Semiconductor materials 55%
  • Manufacturing Firms 52%
  16 Citations (Scopus)

• Precision material removal using the electrokinetic phenomenon

  Leo, C. S., Blackburn, T. L., Ng, S. H., Yang, C., Butler, D. L. & Danyluk, S., 2008, Proceedings of the 23rd Annual Meeting of the American Society for Precision Engineering, ASPE 2008 and the 12th ICPE. (Proceedings of the 23rd Annual Meeting of the American Society for Precision Engineering, ASPE 2008 and the 12th ICPE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  2 Citations (Scopus)

• Reversible wetting of Titanium dioxide films

  Toh, A. G. G., Nolan, M. G., Cai, R. & Butler, D. L., 2008, Device and Process Technologies for Microelectronics, MEMS, Photonics, and Nanotechnology IV. Society of Photo-Optical Instrumentation Engineers, 680004. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6800).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Titanium Dioxide 100%
  • Wettability 78%
  • Wetting 76%
  • Titanium dioxide 69%
  • TiO2 60%
  5 Citations (Scopus)
• 2007

  A lattice Boltzmann based single-phase method for modeling surface tension and wetting

  Xing, X., Butler, D. L. & Yang, C., Apr 2007, In: Computational Materials Science. 39, 2, p. 282-290 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Lattice Boltzmann 100%
  • Wetting 90%
  • Surface Tension 72%
  • Surface tension 66%
  • wetting 59%
  22 Citations (Scopus)

• Fabrication of diamond micro size tool using FIB

  Ding, X., Lim, G. C., Lee Butler, D. & Cheng, C. K., 2007, Proceedings of the 7th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2007. Thornett, E. (ed.). euspen, p. 477-480 4 p. (Proceedings of the 7th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2007; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Focused ion beams 100%
  • Sputtering 92%
  • Ion Beam 79%
  • Diamonds 71%
  • diamond 71%

• Lattice Boltzmann-based single-phase method for free surface tracking of droplet motions

  Xing, X. Q., Butler, D. L. & Yang, C., 20 Jan 2007, In: International Journal for Numerical Methods in Fluids. 53, 2, p. 333-351 19 p.

  Research output: Contribution to journal › Article › peer-review

  • Lattice Boltzmann 100%
  • Droplet 82%
  • Free Surface 67%
  • Lattice Boltzmann Method 48%
  • Motion 45%
  25 Citations (Scopus)